Acrylic Sheet docking: This is relatively simple. You only need to put the two acrylic boards that must be connected on the actual operation service platform, and then put the tape on the bottom to leave a very small gap for this interface method. Just add adhesives. Pmma Sheet slope Paste: Paste the slope must be formed at 90 degrees to avoid moving the adhesive surface. The application of adhesive should be uniform and slow. After completely dry, you can remove the imitation.
Polycarbonate Sheet External Wall Paste: The external wall paste is the most common paste technology. The surface of the paste should be scrub and clean first. It is best to use the imitation model to complete the paste to make the paste not shake, which is conducive to improving the quality of the paste. When pasted on an organic plate with a thickness of 2mm, you can insert and connect the fine iron wire through the action of capillary. Pull out the wire before the adhesive is dry, or you can choose to use the tape and then apply the adhesive. PMMA Sheet Plane Paste: Plane Paste is a more unique paste method. First, clean the surface to be adhered to the surface, place it horizontally, and apply appropriate adhesives on it. Put the other side of the other acoustic board, contact the acrylic board with adhesive, and then slowly learn to put them down evenly, drive away the bubbles from one side, and then stick. (Common questions: Such adhesives will erode the acrylic board, so protective measures must be taken) The surface strength of the acrylic board is equal to the surface strength of aluminum profiles, and the surface layer should be prevented from being scratched during use or production. The surface layer of the organic glass plate is generally maintained with a packaging paper or a protective film, and you don't have to tear it off. The thermal deformation temperature of the acrylic board is about 100 degrees, and the constant temperature should not be higher than 90 degrees. It is easy to deform at high temperature, so it should not be placed in high temperature areas. The acrylic board is prone to electrostatic induction, which absorbs dust. When cleaning, you can scrub with 1%soap with a soft cotton cloth. The Acrylic Panel has a certain thermal expansion coefficient. When installing an organic glass board (acrylic) board, you must consider leaving a moderate scaling gap. 
